Skip to content
NRS

Exterior Construction

Siding Installation & Repair in Plano & DFW

Siding and trim repair or replacement — rot cut out, water managed, finished to survive Texas sun.

Rating

5.0 on Google

Base

Plano, TX

Territory

Dallas–Fort Worth

Estimates

Free

Free estimate · Siding

Tell us about the siding you have in mind.

Request your free estimate

Two minutes to fill in. We call you back to scope the project — no obligation.

We'll only use your details to respond to this request. Prefer to talk? (469) 560-7311

  • WhoLocally owned general contractor in Plano, serving Dallas–Fort Worth
  • EstimatesFree estimates
  • HoursOpen 24 hours, 7 days a week — call anytime
  • PriceWritten scope and price, approved by you before work starts
  • RatingRated 5.0 on Google
  • ScopeOne contractor for the whole job — 27 trades under one roof

Prefer to talk? (469) 560-7311

Most DFW houses are brick in front and siding everywhere the builder economized — gables, dormers, second stories and rear elevations. That siding, along with fascia and soffits, is what rots first: sun beats on it, sprinklers soak the bottom courses, and any failed caulk line lets water behind the paint. Rot never gets better on its own; it just recruits the boards next to it.

We repair siding by cutting damage back to sound material and replacing it correctly — flashed, gapped and caulked so the water management works — and we re-side elevations or whole houses in fiber cement and comparable modern materials when repair stops being economical. Everything gets primed and painted to match, because bare repairs are just future rot with better intentions.

New cladding and trim glowing at dusk
New cladding and trim glowing at dusk
Painted built-in cabinetry with slender brass pulls
Siding — design study

How we work

One contractor is answerable for the whole scope — from the first demolition day to the final walkthrough.

No handing you between trades, no gap where nobody owns the problem.

What siding work includes

  • Rot repair — cut back to sound material, not patched over
  • Fascia and soffit replacement
  • Fiber cement and wood siding installation
  • Flashing and caulking done as water management, not decoration
  • Priming and painting to match the house

How the project runs

  1. Call or send the form

    Tell us what you're planning and we'll ask the questions that shape a real scope.

  2. On-site evaluation

    We measure, assess what's structural and talk through options. The estimate is free.

  3. Written scope & price

    Approved by you before anything starts — no verbal budgets.

  4. The build

    One schedule, one point of contact, trades sequenced in the right order.

  5. Walkthrough

    We write the punch list down and then actually finish it.

Common questions

Can you replace just the rotted boards?
Yes — targeted repair is normal work and often all that's needed. We'll also show you why it rotted (sprinkler spray, failed gutter, open joint), because fixing that is what stops the sequel.
What siding handles Texas weather best?
Fiber cement is the workhorse here — dimensionally stable in heat, rot-proof and paintable. We'll be straight about where cheaper materials are fine and where they aren't.

Where we do this work

Siding across the Dallas–Fort Worth metroplex — Plano, Frisco, McKinney, Allen, Prosper, Dallas, Richardson, Irving, Flower Mound, Southlake, Arlington, Fort Worth, Carrollton, Garland, Lewisville, Grapevine, Coppell, The Colony, Little Elm, Wylie, Rowlett, Addison, Celina, Highland Park and the surrounding metroplex.

Free estimate

Planning siding in DFW?

One experienced contractor, one written scope, one number to call.

(469) 560-7311Free estimate